Swimming pools are a fun part of houses. It is where families spend most of their weekends. During the summer, the backyard becomes like a hangout zone.

All your family and friends, especially children, come over all the time. Life feels like a party and the days are full of fun and laughter. But with this extra use of the swimming pool, comes a little extra responsibility in the form of maintenance.

There are automated cleaners that can be installed so that you do not have to worry about cleaning or manually clean out the debris. There are also other automated equipment that can adjust and maintain the chemistry of the water. But apart from basic cleanliness and hygiene, there is a lot more you need to do to keep your pool up and running.

The pool pump is the most important part of swimming pool maintenance. Taking care of the pump, however, does not require too much time or effort. There are a few things that you need to keep in mind when pool pump maintenance is concerned. The two major parts of a pump that need to be taken care of are the filter and the pump.

1. Ensure that you filter the cartridges regularly.

Filtration is one of the most important jobs of a swimming pool pump. It is the key to maintaining a healthy and hygienic swimming pool.

To keep the pool pump in pristine condition, you need to make sure that the filter cartridges are clean. You need to clean the cartridge every time you use the pool.

Also, the cartridges need to be changed every two weeks. If the pool is being used more often than usual, like in the summers, the cartridge will need to be changed more often. Make sure that you purchase a few extra cartridges and keep them handy. Every time you clean the filter cartridge, check for possible wear and tear.

2. Keep the motor in good condition.

To keep the motor in top-notch condition, you need to maintain a healthy environment as the pump by itself does not need any maintenance. Make sure that there are no leaks in the pump joints as it is important that the motor stays dry.

Do not place the motor in an area which is prone to being damp. Always keep the pump in a shed so that it does not get wet due to rain or splashing of water. Never clean the motor with a water hose.

Keeping the motor cool is the next important step in pool pump motor maintenance.

Make sure that there is enough air circulation around the motor and do not let debris accumulate near it. Clean the air inlets regularly. Remember, whenever you are cleaning the motor, make sure that the power is turned off.

Ensure that all the bearings of the motor are properly lubricated. If the pool pump is going to be off for a while, make sure that it is not covered in a way that moisture can develop. Do not store any chemicals near the pool pump motor as the fumes can corrode the inside parts of the motor.

3. Store the pump properly.

Keeping the pool pump in working condition mostly requires keeping the motor running and the filter clean. But apart from this, there are a few more little things that you can do to keep your swimming pool motor in perfect condition.

If you have stored the pool pump in a shed, make sure that there is ample air circulation so that the pump can stay cool. If the pool pump is in the open, make sure that it is placed away from the pool and in a place where it cannot get wet easily.

By following these simple tips, you can increase the life your swimming pool pump.

These are some of the insights for maintaining your swimming pool and reap its comforts. These insights flashlight on the must-haves of swimming pool pump maintenance.

We look forward to your experience with swimming pools. Let it rip.


What to Expect, when we resurface your pool

Post Comment